CONFIG_SLIP_MODE_SLIP6: Six bit SLIP encapsulation

General informations

The Linux kernel configuration item CONFIG_SLIP_MODE_SLIP6 has multiple definitions:

Six bit SLIP encapsulation found in drivers/net/slip/Kconfig

The configuration item CONFIG_SLIP_MODE_SLIP6:

• prompt: Six bit SLIP encapsulation
• type: bool
• depends on: CONFIG_SLIP
• defined in drivers/net/slip/Kconfig
• found in Linux kernels: 3.2–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.8, 6.9-rc+HEAD

Help text

Just occasionally you may need to run IP over hostile serial networks that don't pass all control characters or are only seven bit. Saying Y here adds an extra mode you can use with SLIP: "slip6". In this mode, SLIP will only send normal ASCII symbols over the serial device. Naturally, this has to be supported at the other end of the link as well. It's good enough, for example, to run IP over the async ports of a Camtec JNT Pad. If unsure, say N.

Six bit SLIP encapsulation found in drivers/net/Kconfig

The configuration item CONFIG_SLIP_MODE_SLIP6:

• prompt: Six bit SLIP encapsulation
• type: bool
• depends on: CONFIG_SLIP
• defined in drivers/net/Kconfig
• found in Linux kernels: 2.5.45–2.5.75, 2.6.0–2.6.39, 3.0–3.1

Help text

Just occasionally you may need to run IP over hostile serial networks that don't pass all control characters or are only seven bit. Saying Y here adds an extra mode you can use with SLIP: "slip6". In this mode, SLIP will only send normal ASCII symbols over the serial device. Naturally, this has to be supported at the other end of the link as well. It's good enough, for example, to run IP over the async ports of a Camtec JNT Pad. If unsure, say N.

Six bit SLIP encapsulation found in arch/um/Kconfig_net

The configuration item CONFIG_SLIP_MODE_SLIP6:

• prompt: Six bit SLIP encapsulation
• type: bool
• depends on: CONFIG_SLIP = CONFIG_y
• defined in arch/um/Kconfig_net
• found in Linux kernels: 2.5.45–2.5.75, 2.6.0–2.6.8

Help text

(none)

Six bit SLIP encapsulation found in arch/sparc/Kconfig

The configuration item CONFIG_SLIP_MODE_SLIP6:

• prompt: Six bit SLIP encapsulation
• type: bool
• depends on: CONFIG_SLIP
• defined in arch/sparc/Kconfig
• found in Linux kernels: 2.5.45–2.5.54

Help text

Just occasionally you may need to run IP over hostile serial networks that don't pass all control characters or are only seven bit. Saying Y here adds an extra mode you can use with SLIP: "slip6". In this mode, SLIP will only send normal ASCII symbols over the serial device. Naturally, this has to be supported at the other end of the link as well. It's good enough, for example, to run IP over the async ports of a Camtec JNT Pad. If unsure, say N.

Six bit SLIP encapsulation found in arch/m68k/Kconfig

The configuration item CONFIG_SLIP_MODE_SLIP6:

• prompt: Six bit SLIP encapsulation
• type: bool
• depends on: CONFIG_SLIP
• defined in arch/m68k/Kconfig
• found in Linux kernels: 2.5.45–2.5.54

Help text

Just occasionally you may need to run IP over hostile serial networks that don't pass all control characters or are only seven bit. Saying Y here adds an extra mode you can use with SLIP: "slip6". In this mode, SLIP will only send normal ASCII symbols over the serial device. Naturally, this has to be supported at the other end of the link as well. It's good enough, for example, to run IP over the async ports of a Camtec JNT Pad. If unsure, say N.

Hardware

LKDDb

Raw data from LKDDb:

• (none)

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: