CONFIG_CHARGER_RT9467: Richtek RT9467 Battery Charger Driver

General informations

The Linux kernel configuration item CONFIG_CHARGER_RT9467:

• prompt: Richtek RT9467 Battery Charger Driver
• type: tristate
• depends on: CONFIG_I2C && CONFIG_GPIOLIB && CONFIG_REGULATOR
• defined in drivers/power/supply/Kconfig
• found in Linux kernels: 6.3–6.12
• modules built: rt9467-charger

Help text

Say Y here to enable RT9467 Battery Charger. RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for portable applications. It integrates a synchronous PWM controller, power MOSFETs, input current sensing and regulation, high-accuracy voltage regulation, and charge termination. The charge current is regulated through integrated sensing resistors. It also features USB On-The-Go (OTG) support and integrates D+/D- pin for USB host/charging port detection.

This driver can also be built as a module. If so, the module will be called "rt9467-charger".

Hardware

LKDDb

Raw data from LKDDb:

• lkddb module rt9467-charger CONFIG_CHARGER_RT9467 : drivers/power/supply/Kconfig : "Richtek RT9467 Battery Charger Driver" # in 6.3–6.12
• lkddb of "" "" "richtek,rt9467" : CONFIG_CHARGER_RT9467 CONFIG_POWER_SUPPLY : drivers/power/supply/rt9467-charger.c # in 6.3–6.12

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: