CONFIG_GPIO_REALTEK_OTTO: Realtek Otto GPIO support

General informations

The Linux kernel configuration item CONFIG_GPIO_REALTEK_OTTO:

• prompt: Realtek Otto GPIO support
• type: tristate
• depends on: CONFIG_MACH_REALTEK_RTL
• defined in drivers/gpio/Kconfig
• found in Linux kernels: 5.13–5.19, 6.0–6.8, 6.9-rc+HEAD
• modules built: gpio-realtek-otto

Help text

The GPIO controller on the Otto MIPS platform supports up to two banks of 32 GPIOs, with edge triggered interrupts. The 32 GPIOs are grouped in four 8-bit wide ports.

When built as a module, the module will be called realtek_otto_gpio.

Hardware

LKDDb

Raw data from LKDDb:

• lkddb module gpio-realtek-otto CONFIG_GPIO_REALTEK_OTTO : drivers/gpio/Kconfig : "Realtek Otto GPIO support" # in 5.13–5.19, 6.0–6.8, 6.9-rc+HEAD
• lkddb of "" "" "realtek,otto-gpio" : CONFIG_GPIOLIB CONFIG_GPIO_REALTEK_OTTO : drivers/gpio/gpio-realtek-otto.c # in 5.13–5.19, 6.0–6.8, 6.9-rc+HEAD
• lkddb of "" "" "realtek,rtl8380-gpio" : CONFIG_GPIOLIB CONFIG_GPIO_REALTEK_OTTO : drivers/gpio/gpio-realtek-otto.c # in 5.13–5.19, 6.0–6.8, 6.9-rc+HEAD
• lkddb of "" "" "realtek,rtl8390-gpio" : CONFIG_GPIOLIB CONFIG_GPIO_REALTEK_OTTO : drivers/gpio/gpio-realtek-otto.c # in 5.13–5.19, 6.0–6.8, 6.9-rc+HEAD
• lkddb of "" "" "realtek,rtl9300-gpio" : CONFIG_GPIOLIB CONFIG_GPIO_REALTEK_OTTO : drivers/gpio/gpio-realtek-otto.c # in 5.19, 6.0–6.8, 6.9-rc+HEAD
• lkddb of "" "" "realtek,rtl9310-gpio" : CONFIG_GPIOLIB CONFIG_GPIO_REALTEK_OTTO : drivers/gpio/gpio-realtek-otto.c # in 5.19, 6.0–6.8, 6.9-rc+HEAD
• lkddb platform "realtek-otto-gpio" : CONFIG_GPIOLIB CONFIG_GPIO_REALTEK_OTTO : drivers/gpio/gpio-realtek-otto.c # in 5.13–5.19, 6.0–6.8, 6.9-rc+HEAD

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: