Custom Search
Navigation: Linux Kernel Driver DataBase - web LKDDB: Main index - H index
The Linux kernel configuration item CONFIG_HSR has multiple definitions:
net/hsr/KconfigThe configuration item CONFIG_HSR:
(none)hsrThis enables IEC 62439 defined High-availability Seamless Redundancy (HSR) and Parallel Redundancy Protocol (PRP).
If you say Y here, then your Linux box will be able to act as a DANH ("Doubly attached node implementing HSR") or DANP ("Doubly attached node implementing PRP"). For this to work, your Linux box needs (at least) two physical Ethernet interfaces.
For DANH, it must be connected as a node in a ring network together with other HSR capable nodes. All Ethernet frames sent over the HSR device will be sent in both directions on the ring (over both slave ports), giving a redundant, instant fail-over network. Each HSR node in the ring acts like a bridge for HSR frames, but filters frames that have been forwarded earlier.
For DANP, it must be connected as a node connecting to two separate networks over the two slave interfaces. Like HSR, Ethernet frames sent over the PRP device will be sent to both networks giving a redundant, instant fail-over network. Unlike HSR, PRP networks can have Singly Attached Nodes (SAN) such as PC, printer, bridges etc and will be able to communicate with DANP nodes.
This code is a "best effort" to comply with the HSR standard as described in IEC 62439-3:2010 (HSRv0) and IEC 62439-3:2012 (HSRv1), and PRP standard described in IEC 62439-4:2012 (PRP), but no compliancy tests have been made. Use iproute2 to select the protocol you would like to use.
You need to perform any and all necessary tests yourself before relying on this code in a safety critical system!
If unsure, say N.
net/hsr/KconfigThe configuration item CONFIG_HSR:
(none)hsrIf you say Y here, then your Linux box will be able to act as a DANH ("Doubly attached node implementing HSR"). For this to work, your Linux box needs (at least) two physical Ethernet interfaces, and it must be connected as a node in a ring network together with other HSR capable nodes.
All Ethernet frames sent over the hsr device will be sent in both directions on the ring (over both slave ports), giving a redundant, instant fail-over network. Each HSR node in the ring acts like a bridge for HSR frames, but filters frames that have been forwarded earlier.
This code is a "best effort" to comply with the HSR standard as described in IEC 62439-3:2010 (HSRv0) and IEC 62439-3:2012 (HSRv1), but no compliancy tests have been made. Use iproute2 to select the version you desire.
You need to perform any and all necessary tests yourself before relying on this code in a safety critical system!
If unsure, say N.
Raw data from LKDDb:
lkddb module hsr CONFIG_HSR : net/hsr/Kconfig : "High-availability Seamless Redundancy (HSR & PRP)" # in 3.13–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.12This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).
The data is retrived from:
Popular queries:
Navigation: Linux Kernel Driver DataBase - web LKDDB: main index - H index
Automatically generated (in year 2024). See also LKDDb sources on GitLab