CONFIG_NET_DSA_TAG_OCELOT: Tag driver for Ocelot family of switches, using NPI port

General informations

The Linux kernel configuration item CONFIG_NET_DSA_TAG_OCELOT has multiple definitions:

Tag driver for Ocelot family of switches, using NPI port found in net/dsa/Kconfig

The configuration item CONFIG_NET_DSA_TAG_OCELOT:

• prompt: Tag driver for Ocelot family of switches, using NPI port
• type: tristate
• depends on: (none)
• defined in net/dsa/Kconfig
• found in Linux kernels: 5.12–5.19, 6.0–6.12, 6.13-rc+HEAD
• modules built: tag_ocelot

Help text

Say Y or M if you want to enable NPI tagging for the Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514, VSC9953, VSC9959). In this mode, the frames over the Ethernet CPU port are prepended with a hardware-defined injection/extraction frame header. Flow control (PAUSE frames) over the CPU port is not supported when operating in this mode.

Tag driver for Ocelot family of switches found in net/dsa/Kconfig

The configuration item CONFIG_NET_DSA_TAG_OCELOT:

• prompt: Tag driver for Ocelot family of switches
• type: tristate
• depends on: (none)
• defined in net/dsa/Kconfig
• found in Linux kernels: 5.5–5.11
• modules built: tag_ocelot

Help text

Say Y or M if you want to enable support for tagging frames for the Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514, VSC9959).

Hardware

LKDDb

Raw data from LKDDb:

• lkddb module tag_ocelot CONFIG_NET_DSA_TAG_OCELOT : net/dsa/Kconfig : "Tag driver for Ocelot family of switches, using NPI port" # in 5.5–5.19, 6.0–6.12, 6.13-rc+HEAD

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: