CONFIG_OMAP_GPMC_DEBUG: Enable GPMC debug output and skip reset of GPMC during init

General informations

The Linux kernel configuration item CONFIG_OMAP_GPMC_DEBUG has multiple definitions:

Enable GPMC debug output and skip reset of GPMC during init found in drivers/memory/Kconfig

The configuration item CONFIG_OMAP_GPMC_DEBUG:

• prompt: Enable GPMC debug output and skip reset of GPMC during init
• type: bool
• depends on: CONFIG_OMAP_GPMC
• defined in drivers/memory/Kconfig
• found in Linux kernels: 4.3–4.20, 5.0–5.19, 6.0–6.12

Help text

Enables verbose debugging mostly to decode the bootloader provided timings. To preserve the bootloader provided timings, the reset of GPMC is skipped during init. Enable this during development to configure devices connected to the GPMC bus.

NOTE: In addition to matching the register setup with the bootloader you also need to match the GPMC FCLK frequency used by the bootloader or else the GPMC timings won't be identical with the bootloader timings.

found in drivers/memory/Kconfig

The configuration item CONFIG_OMAP_GPMC_DEBUG:

• prompt:
• type: bool
• depends on: CONFIG_OMAP_GPMC
• defined in drivers/memory/Kconfig
• found in Linux kernels: 4.2

Help text

Enables verbose debugging mostly to decode the bootloader provided timings. Enable this during development to configure devices connected to the GPMC bus.

Hardware

LKDDb

Raw data from LKDDb:

• (none)

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: