CONFIG_FT_FDC_BASE: IO base of the floppy disk controller

General informations

The Linux kernel configuration item CONFIG_FT_FDC_BASE:

• prompt: IO base of the floppy disk controller
• type: hex
• depends on: CONFIG_FTAPE && ! CONFIG_FT_STD_FDC
• defined in drivers/char/ftape/Kconfig
• found in Linux kernels: 2.5.45–2.5.75, 2.6.0–2.6.19

Help text

You don't need to specify a value if the following default settings for the base IO address are correct: <<< MACH-2 : 0x1E0 >>> <<< FC-10/FC-20: 0x180 >>> <<< Secondary : 0x370 >>> Secondary refers to a secondary FDC controller like the "high speed" controllers delivered by Seagate or Exabyte or Iomega's Ditto Dash. Please make sure that the setting for the IO base address specified here is correct. USE THE MANUAL OF YOUR TAPE DRIVE OR CONTROLLER CARD TO DETERMINE THE CORRECT SETTING. If you are already successfully using the tape drive with another operating system then you definitely should use the same settings for the IO base that has proven to work with that other OS.

Note that this menu lets you specify only the default setting for the IO base. The hardware configuration can be changed at boot time (when ftape is compiled into the kernel, i.e. if you specified Y to "Floppy tape drive") or module load time (i.e. if you have said M to "Floppy tape drive").

Please read also the file Documentation/ftape.txt which contains a short description of the parameters that can be set at boot or load time.

Hardware

LKDDb

Raw data from LKDDb:

• (none)

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: