CONFIG_MTD_NAND_NUC900: Nuvoton NUC9xx/w90p910 NAND controller

General informations

The Linux kernel configuration item CONFIG_MTD_NAND_NUC900 has multiple definitions:

The configuration item CONFIG_MTD_NAND_NUC900:

prompt: Nuvoton NUC9xx/w90p910 NAND controller
type: tristate
depends on: ( CONFIG_ARCH_W90X900 || CONFIG_COMPILE_TEST ) && ( CONFIG_HAS_IOMEM )
defined in drivers/mtd/nand/raw/Kconfig
found in Linux kernels: 5.2–5.3
modules built: nuc900_nand, nuc900_nand

This enables the driver for the NAND Flash on evaluation board based on w90p910 / NUC9xx.

The configuration item CONFIG_MTD_NAND_NUC900:

prompt: Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards.
type: tristate
depends on: ( CONFIG_ARCH_W90X900 || CONFIG_COMPILE_TEST ) && ( CONFIG_HAS_IOMEM )
defined in drivers/mtd/nand/raw/Kconfig
found in Linux kernels: 4.17–4.20, 5.0–5.1
modules built: nuc900_nand, nuc900_nand

This enables the driver for the NAND Flash on evaluation board based on w90p910 / NUC9xx.

The configuration item CONFIG_MTD_NAND_NUC900:

This enables the driver for the NAND Flash on evaluation board based on w90p910 / NUC9xx.

Raw data from LKDDb:

lkddb module nuc900_nand CONFIG_MTD_NAND_NUC900 : drivers/mtd/nand/Kconfig : "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards." # in 2.6.35–2.6.39, 3.0–3.19, 4.0–4.16
lkddb module nuc900_nand CONFIG_MTD_NAND_NUC900 : drivers/mtd/nand/raw/Kconfig : "Nuvoton NUC9xx/w90p910 NAND controller" # in 4.17–4.20, 5.0–5.3
lkddb platform "nuc900-fmi" : CONFIG_MTD CONFIG_MTD_NAND_NUC900 : drivers/mtd/nand/nuc900_nand.c # in 2.6.35–2.6.39, 3.0–3.19, 4.0–4.16
lkddb platform "nuc900-fmi" : CONFIG_MTD CONFIG_MTD_NAND_NUC900 : drivers/mtd/nand/raw/nuc900_nand.c # in 4.17–4.20, 5.0–5.3

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

Custom Search

Popular queries:

Automatically generated (in year 2024). See also LKDDb sources on GitLab