CONFIG_RADIO_RTRACK: AIMSlab RadioTrack (aka RadioReveal) support

General informations

The Linux kernel configuration item CONFIG_RADIO_RTRACK:

• prompt: AIMSlab RadioTrack (aka RadioReveal) support
• type: tristate
• depends on: ( CONFIG_ISA || CONFIG_COMPILE_TEST ) && ( CONFIG_HAS_IOPORT )
• defined in drivers/media/radio/Kconfig
• found in Linux kernels: 2.5.45–2.5.75, 2.6.0–2.6.39, 3.0–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.12, 6.13-rc+HEAD
• modules built: radio-aimslab

Help text

Choose Y here if you have one of these FM radio cards, and then fill in the port address below.

Note that newer AIMSlab RadioTrack cards have a different chipset and are not supported by this driver. For these cards, use the RadioTrack II driver below.

If you have a GemTeks combined (PnP) sound- and radio card you must use this driver as a module and setup the card with isapnptools. You must also pass the module a suitable io parameter, 0x248 has been reported to be used by these cards.

More information is contained in the file Documentation/driver-api/media/drivers/radiotrack.rst.

To compile this driver as a module, choose M here: the module will be called radio-aimslab.

Hardware

LKDDb

Raw data from LKDDb:

• lkddb module radio-aimslab CONFIG_RADIO_RTRACK : drivers/media/radio/Kconfig : "AIMSlab RadioTrack (aka RadioReveal) support" # in 2.5.45–2.5.75, 2.6.0–2.6.39, 3.0–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.12, 6.13-rc+HEAD

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: