CONFIG_SCSI_PPA: IOMEGA parallel port (ppa - older drives)

General informations

The Linux kernel configuration item CONFIG_SCSI_PPA:

• prompt: IOMEGA parallel port (ppa - older drives)
• type: tristate
• depends on: ( CONFIG_SCSI && CONFIG_PARPORT_PC ) && ( CONFIG_HAS_IOPORT )
• defined in drivers/scsi/Kconfig
• found in Linux kernels: 2.5.45–2.5.75, 2.6.0–2.6.39, 3.0–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.12, 6.13-rc+HEAD
• modules built: ppa

Help text

This driver supports older versions of IOMEGA's parallel port ZIP drive (a 100 MB removable media device).

Note that you can say N here if you have the SCSI version of the ZIP drive: it will be supported automatically if you said Y to the generic "SCSI disk support", above.

If you have the ZIP Plus drive or a more recent parallel port ZIP drive (if the supplied cable with the drive is labeled "AutoDetect") then you should say N here and Y to "IOMEGA parallel port (imm - newer drives)", below.

For more information about this driver and how to use it you should read the file Documentation/scsi/ppa.rst. You should also read the SCSI-HOWTO, which is available from http://www.tldp.org/docs.html#howto. If you use this driver, you will still be able to use the parallel port for other tasks, such as a printer; it is safe to compile both drivers into the kernel.

To compile this driver as a module, choose M here: the module will be called ppa.

Hardware

LKDDb

Raw data from LKDDb:

• lkddb module ppa CONFIG_SCSI_PPA : drivers/scsi/Kconfig : "IOMEGA parallel port (ppa - older drives)" # in 2.5.45–2.5.75, 2.6.0–2.6.39, 3.0–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.12, 6.13-rc+HEAD

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: