CONFIG_SENSORS_LM3533: LM3533 ambient light sensor

General informations

The Linux kernel configuration item CONFIG_SENSORS_LM3533:

• prompt: LM3533 ambient light sensor
• type: tristate
• depends on: CONFIG_MFD_LM3533
• defined in drivers/iio/light/Kconfig
• found in Linux kernels: 3.6–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.11, 6.12-rc+HEAD
• modules built: lm3533-als

Help text

If you say yes here you get support for the ambient light sensor interface on National Semiconductor / TI LM3533 Lighting Power chips.

The sensor interface can be used to control the LEDs and backlights of the chip through defining five light zones and three sets of corresponding output-current values.

The driver provides raw and mean adc readings along with the current light zone through sysfs. A threshold event can be generated on zone changes. The ALS-control output values can be set per zone for the three current output channels.

Hardware

LKDDb

Raw data from LKDDb:

• lkddb module lm3533-als CONFIG_SENSORS_LM3533 : drivers/iio/light/Kconfig : "LM3533 ambient light sensor" # in 3.6–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.11, 6.12-rc+HEAD
• lkddb platform "lm3533-als" : CONFIG_IIO CONFIG_SENSORS_LM3533 : drivers/iio/light/lm3533-als.c # in 3.6–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.11, 6.12-rc+HEAD

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: