CONFIG_SERIAL_8250_IOC3: SGI IOC3 8250 UART support

General informations

The Linux kernel configuration item CONFIG_SERIAL_8250_IOC3:

• prompt: SGI IOC3 8250 UART support
• type: tristate
• depends on: ( CONFIG_SERIAL_8250 ) && ( CONFIG_SGI_MFD_IOC3 || CONFIG_COMPILE_TEST )
• defined in drivers/tty/serial/8250/Kconfig
• found in Linux kernels: 5.6–5.19, 6.0–6.12
• modules built: 8250_ioc3

Help text

Enable this if you have a SGI Origin or Octane machine. This module provides basic serial support by directly driving the UART chip behind the IOC3 device on those systems. Maximum baud speed is 38400bps using this driver.

Hardware

LKDDb

Raw data from LKDDb:

• lkddb module 8250_ioc3 CONFIG_SERIAL_8250_IOC3 : drivers/tty/serial/8250/Kconfig : "SGI IOC3 8250 UART support" # in 5.6–5.19, 6.0–6.12
• lkddb platform "ioc3-serial8250" : CONFIG_SERIAL_8250 CONFIG_SERIAL_8250_IOC3 : drivers/tty/serial/8250/8250_ioc3.c # in 5.6–5.19, 6.0–6.4
• lkddb platform "ioc3-serial8250" : CONFIG_SERIAL_8250_IOC3 : drivers/tty/serial/8250/8250_ioc3.c # in 6.5–6.12

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: