CONFIG_ISP1301_OMAP: Philips ISP1301 with OMAP OTG

General informations

The Linux kernel configuration item CONFIG_ISP1301_OMAP has multiple definitions:

Philips ISP1301 with OMAP OTG found in drivers/usb/phy/Kconfig

The configuration item CONFIG_ISP1301_OMAP:

• prompt: Philips ISP1301 with OMAP OTG
• type: tristate
• depends on: ( CONFIG_I2C ) && ( CONFIG_ARCH_OMAP_OTG || ( CONFIG_ARM && CONFIG_COMPILE_TEST )) && ( CONFIG_USB ) && ( CONFIG_USB_GADGET || ! CONFIG_USB_GADGET )
• defined in drivers/usb/phy/Kconfig
• found in Linux kernels: 3.10–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.2
• modules built: isp1301_omap, isp1301_omap, phy-isp1301-omap

Help text

If you say yes here you get support for the Philips ISP1301 USB-On-The-Go transceiver working with the OMAP OTG controller. The ISP1301 is a full speed USB transceiver which is used in products including H2, H3, and H4 development boards for Texas Instruments OMAP processors.

This driver can also be built as a module. If so, the module will be called phy-isp1301-omap.

Philips ISP1301 with OMAP OTG found in drivers/usb/otg/Kconfig

The configuration item CONFIG_ISP1301_OMAP:

• prompt: Philips ISP1301 with OMAP OTG
• type: tristate
• depends on: CONFIG_I2C && CONFIG_ARCH_OMAP_OTG
• defined in drivers/usb/otg/Kconfig
• found in Linux kernels: 2.6.29–2.6.39, 3.0–3.9
• modules built: isp1301_omap, isp1301_omap, phy-isp1301-omap

Help text

If you say yes here you get support for the Philips ISP1301 USB-On-The-Go transceiver working with the OMAP OTG controller. The ISP1301 is a full speed USB transceiver which is used in products including H2, H3, and H4 development boards for Texas Instruments OMAP processors.

This driver can also be built as a module. If so, the module will be called isp1301_omap.

Philips ISP1301 with OMAP OTG found in drivers/i2c/chips/Kconfig

The configuration item CONFIG_ISP1301_OMAP:

• prompt: Philips ISP1301 with OMAP OTG
• type: tristate
• depends on: CONFIG_ARCH_OMAP_OTG
• defined in drivers/i2c/chips/Kconfig
• found in Linux kernels: 2.6.9–2.6.28
• modules built: isp1301_omap, isp1301_omap, phy-isp1301-omap

Help text

If you say yes here you get support for the Philips ISP1301 USB-On-The-Go transceiver working with the OMAP OTG controller. The ISP1301 is used in products including H2 and H3 development boards for Texas Instruments OMAP processors.

This driver can also be built as a module. If so, the module will be called isp1301_omap.

Hardware

LKDDb

Raw data from LKDDb:

• lkddb i2c "isp1301_omap" : CONFIG_ISP1301_OMAP : drivers/i2c/chips/isp1301_omap.c # in 2.6.28
• lkddb i2c "isp1301_omap" : CONFIG_ISP1301_OMAP CONFIG_OF CONFIG_PCI CONFIG_USB CONFIG_USB_GADGET CONFIG_USB_PHY CONFIG_USB_SUPPORT : drivers/usb/phy/phy-isp1301-omap.c # in 4.12–4.20, 5.0–5.19, 6.0–6.2
• lkddb i2c "isp1301_omap" : CONFIG_ISP1301_OMAP CONFIG_PCI CONFIG_USB CONFIG_USB_GADGET CONFIG_USB_OTG_UTILS : drivers/usb/otg/isp1301_omap.c # in 3.0–3.9
• lkddb i2c "isp1301_omap" : CONFIG_ISP1301_OMAP CONFIG_PCI CONFIG_USB CONFIG_USB_GADGET CONFIG_USB_PHY : drivers/usb/phy/phy-isp1301-omap.c # in 3.10–3.11
• lkddb i2c "isp1301_omap" : CONFIG_ISP1301_OMAP CONFIG_PCI CONFIG_USB CONFIG_USB_GADGET CONFIG_USB_PHY CONFIG_USB_SUPPORT : drivers/usb/phy/phy-isp1301-omap.c # in 3.12–3.19, 4.0–4.11
• lkddb i2c "isp1301_omap" : CONFIG_ISP1301_OMAP CONFIG_PCI CONFIG_USB CONFIG_USB_OTG_UTILS : drivers/usb/otg/isp1301_omap.c # in 2.6.29–2.6.39
• lkddb module isp1301_omap CONFIG_ISP1301_OMAP : drivers/i2c/chips/Kconfig : "Philips ISP1301 with OMAP OTG" # in 2.6.9–2.6.28
• lkddb module isp1301_omap CONFIG_ISP1301_OMAP : drivers/usb/otg/Kconfig : "Philips ISP1301 with OMAP OTG" # in 2.6.29–2.6.39, 3.0–3.9
• lkddb module phy-isp1301-omap CONFIG_ISP1301_OMAP : drivers/usb/phy/Kconfig : "Philips ISP1301 with OMAP OTG" # in 3.10–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.2
• lkddb platform "omap_otg" : CONFIG_I2C CONFIG_ISP1301_OMAP : drivers/i2c/chips/isp1301_omap.c # in 2.6.15–2.6.21
• lkddb platform "omap_otg" : CONFIG_ISP1301_OMAP : drivers/i2c/chips/isp1301_omap.c # in 2.6.22–2.6.28
• lkddb platform "omap_otg" : CONFIG_ISP1301_OMAP CONFIG_OF CONFIG_PCI CONFIG_USB CONFIG_USB_GADGET CONFIG_USB_PHY CONFIG_USB_SUPPORT : drivers/usb/phy/phy-isp1301-omap.c # in 4.12–4.20, 5.0–5.19, 6.0–6.2
• lkddb platform "omap_otg" : CONFIG_ISP1301_OMAP CONFIG_PCI CONFIG_USB CONFIG_USB_GADGET CONFIG_USB_OTG_UTILS : drivers/usb/otg/isp1301_omap.c # in 3.0–3.9
• lkddb platform "omap_otg" : CONFIG_ISP1301_OMAP CONFIG_PCI CONFIG_USB CONFIG_USB_GADGET CONFIG_USB_PHY : drivers/usb/phy/phy-isp1301-omap.c # in 3.10–3.11
• lkddb platform "omap_otg" : CONFIG_ISP1301_OMAP CONFIG_PCI CONFIG_USB CONFIG_USB_GADGET CONFIG_USB_PHY CONFIG_USB_SUPPORT : drivers/usb/phy/phy-isp1301-omap.c # in 3.12–3.19, 4.0–4.11
• lkddb platform "omap_otg" : CONFIG_ISP1301_OMAP CONFIG_PCI CONFIG_USB CONFIG_USB_OTG_UTILS : drivers/usb/otg/isp1301_omap.c # in 2.6.29–2.6.39

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: