CONFIG_PARIDE_BPCK6: MicroSolutions backpack (Series 6) protocol

General informations

The Linux kernel configuration item CONFIG_PARIDE_BPCK6:

• prompt: MicroSolutions backpack (Series 6) protocol
• type: tristate
• depends on: CONFIG_PARIDE && ! CONFIG_64BIT
• defined in drivers/block/paride/Kconfig
• found in Linux kernels: 2.5.45–2.5.75, 2.6.0–2.6.39, 3.0–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.2, 6.2+HEAD
• modules built: bpck6

Help text

This option enables support for the Micro Solutions BACKPACK parallel port Series 6 IDE protocol. (Most BACKPACK drives made after 1999 were Series 6) Series 6 drives will have the Series noted on the bottom of the drive. Series 5 drivers don't always have it noted.

In other words, if your BACKPACK drive says "Series 6" on the bottom, enable this option.

If you chose to build PARIDE support into your kernel, you may answer Y here to build in the protocol driver, otherwise you should answer M to build it as a loadable module. The module will be called bpck6. You must also have a high-level driver for the type of device that you want to support.

Hardware

LKDDb

Raw data from LKDDb:

• lkddb module bpck6 CONFIG_PARIDE_BPCK6 : drivers/block/paride/Kconfig : "MicroSolutions backpack (Series 6) protocol" # in 2.5.45–2.5.75, 2.6.0–2.6.39, 3.0–3.19, 4.0–4.20, 5.0–5.19, 6.0–6.2, 6.2+HEAD

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: