CONFIG_PHY_STM32_USBPHYC: STMicroelectronics STM32 USB HS PHY Controller driver

General informations

The Linux kernel configuration item CONFIG_PHY_STM32_USBPHYC:

• prompt: STMicroelectronics STM32 USB HS PHY Controller driver
• type: tristate
• depends on: ( CONFIG_ARCH_STM32 || CONFIG_COMPILE_TEST ) && ( CONFIG_COMMON_CLK )
• defined in drivers/phy/st/Kconfig
• found in Linux kernels: 4.17–4.20, 5.0–5.19, 6.0–6.12
• modules built: phy-stm32-usbphyc

Help text

Enable this to support the High-Speed USB transceivers that are part of some STMicroelectronics STM32 SoCs.

This driver controls the entire USB PHY block: the USB PHY controller (USBPHYC) and the two 8-bit wide UTMI+ interfaces. First interface is used by an HS USB Host controller, and the second one is shared between an HS USB OTG controller and an HS USB Host controller, selected by a USB switch.

Hardware

LKDDb

Raw data from LKDDb:

• lkddb module phy-stm32-usbphyc CONFIG_PHY_STM32_USBPHYC : drivers/phy/st/Kconfig : "STMicroelectronics STM32 USB HS PHY Controller driver" # in 4.17–4.20, 5.0–5.19, 6.0–6.12
• lkddb of "" "" "st,stm32mp1-usbphyc" : CONFIG_GENERIC_PHY CONFIG_PHY_STM32_USBPHYC : drivers/phy/st/phy-stm32-usbphyc.c # in 4.17–4.20, 5.0–5.19, 6.0–6.12
• lkddb platform "stm32-usbphyc" : CONFIG_GENERIC_PHY CONFIG_PHY_STM32_USBPHYC : drivers/phy/st/phy-stm32-usbphyc.c # in 4.17–4.20, 5.0–5.19, 6.0–6.12

Sources

This page is automaticly generated with free (libre, open) software lkddb(see lkddb-sources).

The data is retrived from:

• Linux kernel
• Linux Kernel Driver DataBase (LKDDb)

Automatic links from Google (and ads)

Custom Search

Popular queries: